Insight iLOG Studio

FREE Upgrade

You may need to update your software in two stages if you are still using version 5.00 of Insight iLOG Studio.

Here is how you can check that you have the latest version of the software:

1. Open Insight iLOG Studio.
2. Go to 'Help' on the top menu and click on 'About'.
3. This will give you your current version number.

If you have Insight iLOG Studio version 5.00 then you must follow the instructions below and install both upgrades. If you are running version 5.03, then only install the second update listed below.

1) If you have version 5.00 please right click on this link to upgrade to version 5.03 and choose ‘Save target as…’ or ‘Save link as…’ depending on your browser type.

2) If you have version 5.03 please right click on this link to upgrade to version 5.09 and choose ‘Save target as…’ or ‘Save link as…’ depending on your browser type.

What's New in 5.09?

Insight iLOG Studio version 5.09 is compatible with 50 loggers - this means that you will have access to 10 additional drivers (see below):

EuroLab
EuroSense
EasySense 1Link
EasySense 3Link
EasySense Q5+
EasySense Q3+
PicoScope 2000 Series
Logbook GL
Vernier Go!
Vernier LabQuest

In addition, the following changes have been made:

  • New driver for Deltronics MicroLog (USB version)
  • Improvements to Scope logging
  • Improved support for fast logging with Picoscope 2200 series
  • Bug fixes for EasySense loggers (Data Harvest), Vernier Labquest and Logbook GL

Click here to view a list of all 50 of the loggers with which Insight iLOG Studio is compatible.

If you have any problems, you will need to ring 01458 254700 for more information.

This page was last updated 01/07/201

buy online
 
Current software v.5.09
 
   
(C) Logotron Ltd